← Resources
Case studies

What we build, and why it was built that way.

Real projects from our factory in Ashford, Kent. Each one gives the customer's brief, what we built, the certification and the reasoning behind the design. Customers are described by industry, not named.

  • 41 projects
  • 18 for hazardous areas
  • 316L stainless steel as standard
Full case studies

The brief, the build and the certificate.

Compact stainless steel ATEX control stations with red and green lamps and pushbuttons on the lid
ATEX Controls integration

Five compact ATEX control stations for a tight installation envelope

A 300 x 130 x 100mm iSTB control station in 316L, built under our control panel certificate, with Ex signal lamps, a double pushbutton and terminals.

Read the case study →
Brushed 316L stainless steel iTB terminal box on a workbench
ATEX Process plant

Intrinsically safe terminal box with a certified breather drain

A 400 x 400 x 200mm iTB in 1.2mm 316L, certified Ex ia Ga for gas and Ex tb Db for dust, supplied with 40 terminals, trunking and labels ready to install.

Read the case study →
Stainless steel HMI enclosure with a large display cut-out, mounted on two stainless steel pedestal legs
Industrial Food processing

316L HMI pedestal enclosure for a 21.5-inch operator display

Developed after a site visit: a top-hinged 500 x 700 x 210mm iTB on 1000mm stainless steel legs, for a wash-down area.

Read the case study →
Stainless steel enclosure with its top-hinged door held open on gas struts
Industrial Food processing

Top-hinged 316L control enclosure for a vegetable processing line

A 390 x 600 x 230mm iTB with the door hinged at the top on gas struts, so it opens clear of operators and product on a wash-down conveyor line.

Read the case study →
Grey floor-standing control cabinet with cut-outs in the upper doors, on a pallet
Industrial Controls integration

Floor-standing iTB cabinet built to a controls integrator’s drawings

A 1440 x 950 x 820mm cabinet in powder-coated galvanised steel with four lift-off doors, eight mounting plates and a split gland plate for underfloor cabling.

Read the case study →
Light grey control panel door with a grid of pushbuttons and coloured indicator lamps
ATEX Industrial gases

Bringing a start/stop panel into ATEX Zone 1 at an industrial gas site

A like-for-like replacement for a non-hazardous panel: 700 x 700 x 250mm, with 29 pushbuttons and 28 indicators, certified Ex db eb and Ex tb.

Read the case study →
Open stainless steel terminal enclosure with three vertical banks of beige terminals
ATEX Engine and vehicle safety

Pre-wired ATEX engine interface enclosure with 99 terminals

For a maker of explosion protection systems for engines: a 400 x 300 x 150mm 316L terminal box, wired, bridged and tagged in-house to the customer’s drawing.

Read the case study →
Tall brushed stainless steel enclosure lying on a pallet
ATEX Distilling

Zone 2 remote I/O panel for a Scotch whisky distillery tank farm

An 1100 x 600 x 300mm 316L panel sized around Siemens ET 200S I/O, with a gland plate lasered for 77 x M16 and 3 x M20 entries.

Read the case study →
Two stainless steel enclosures joined into one assembly, with a display cut-out and pushbutton holes
ATEX Hazardous-area systems integration

Ex e enclosure for a two-box assembly, from prototype to a batch of ten

A 327 x 1250 x 403mm enclosure in 2mm 316L that bolts to a partner Ex e box, certified for gas and dust, delivered as one prototype and then ten more.

Read the case study →
Large brushed stainless steel double-door enclosure with a display cut-out and pushbutton holes in the left door
Industrial Offshore and marine

1200 x 1200mm 316L main control enclosure for an offshore crane maker

A scaled-up repeat of an earlier unit: double doors with multi-point locking, a removable centre bar and IP66 sealing for a salt-laden atmosphere.

Read the case study →
Light blue powder-coated stainless steel terminal box with a bolt-down lid and gland holes
ATEX Ex equipment distribution

ATEX iSTB terminal boxes for a German Ex equipment distributor

22 powder-coated 316L terminal boxes, then a repeat order of 9 the following year: 200 x 200 x 120mm, certified for gas and dust.

Read the case study →
Open stainless steel junction box with a dense pattern of cable entry holes in the base
ATEX Process plant

26 x M20 entries on one ATEX field junction box

Matching an existing population of junction boxes: a 460 x 380 x 150mm iTB with 26 x M20 entries in the base and 44 terminals, certified Ex eb and Ex tb.

Read the case study →
More projects

Recent builds in brief.

Shorter write-ups of recent enclosures, newest first. Every one was made to the customer's size, layout and cut-outs.

  • Compact Ex db eb control panel
    ATEX 304, 1.2mm Nov 2026

    Compact Ex db eb control panel

    A 260 x 260 x 160mm iTB control panel with two double pushbuttons, two momentary pushbuttons and a pull-to-release E-stop, all labelled to the customer’s layout. Two M25 entries are ready for the customer’s armoured-cable glands. Certified II 2 G Ex db eb IIC T6 Gb and II 2 D Ex tb IIIC T85°C Db IP66, −50°C to +40°C.

  • Safe-area iTB drilled for a display
    Safe area 316L, 1.2mm Oct 2026

    Safe-area iTB drilled for a display

    A 400 x 400 x 300mm iTB with a gland plate drilled for 15 x M20 entries and a pattern of M3 and M5 studs and holes in the door for the customer’s display and interface parts. Every hole, stud and cut-out is where the customer needs it.

  • Enclosure with a batch-controller window
    Safe area 316L, 1.2mm Oct 2026

    Enclosure with a batch-controller window

    A 400 x 300 x 250mm iTB with a 72 x 144mm laminated glass window for a batch controller display, four 19.2mm pushbutton entries and a custom internal bracket to hold the controller.

  • Glazed enclosure with an inner control door
    Industrial 304, 1.5mm Oct 2026

    Glazed enclosure with an inner control door

    A 600 x 600 x 350mm enclosure with a full-size 6.4mm laminated glass outer door and an inner door set 100mm back. Pushbuttons, E-stops and selector switches mount on the inner door, and the IP rating is kept with the outer door closed.

  • Batch-run safe-area iTB
    Safe area 316L, 1.2mm Oct 2026

    Batch-run safe-area iTB

    A 300 x 400 x 150mm iTB, IP66, with 13 x M20 entries laser cut in the base. We build runs of these in small and large batches.

  • Red-painted battery box
    Industrial 316L, 3mm Oct 2026

    Red-painted battery box

    A one-off battery box in 3mm 316L with a red painted finish and a PVC lining inside, made to the customer’s design.

  • iSTB with a safety glass window
    Industrial Stainless steel Sept 2026

    iSTB with a safety glass window

    iSTB enclosures fitted with a safety glass window assembly, for an industrial application.

  • Burner control panel with E-stop
    ATEX 316L, 1.2mm Sept 2026

    Burner control panel with E-stop

    A 350 x 370 x 200mm iTB control panel with seven indicators, three pushbuttons and a shrouded E-stop behind engraved legend plates, a breather drain, and 30 + 8 terminals inside. Certified II 2 G Ex db eb IIC T6 Gb and II 2 D Ex tb IIIC T85°C Db IP66, −50°C to +40°C.

  • ATEX isolator enclosure
    ATEX 316L, 1.2mm Sept 2026

    ATEX isolator enclosure

    A 250 x 200 x 150mm iSTB housing a certified 25A three-pole isolator with its handle through the lid and two M25 entries. Certified II 2 G Ex db eb IIC T6 Gb and II 2 D Ex tb IIIC T85°C Db IP66.

  • Cabinets for the water industry
    Industrial Stainless steel Sept 2026

    Cabinets for the water industry

    A repeat design for a long-standing customer supplying water facilities. We have built several of these and their variants.

  • Enclosure with a removable solar canopy
    Industrial 316L, 1.5mm Sept 2026

    Enclosure with a removable solar canopy

    A 650 x 450 x 300mm IP66 enclosure with a three-sided removable canopy that shades it from the sun without blocking the glands, a 3mm removable gland plate and four cam locks.

  • Coupled multi-compartment cabinets
    Industrial Galvanised steel, RAL 7035 Sept 2026

    Coupled multi-compartment cabinets

    1600 x 400 x 500mm cabinet sections that bolt together through nutserts and a one-piece silicone gasket, with split mounting plates for easier handling. For a long-standing industrial customer.

  • Local control panel, Zone 2
    ATEX Stainless steel Sept 2026

    Local control panel, Zone 2

    Pushbuttons, lamps, a key switch and an E-stop, each with a legend plate. Certified for Zone 2 and available for Zone 1.

  • Ex e enclosure with a stepped shoulder
    ATEX 316L, 1.2mm Sept 2026

    Ex e enclosure with a stepped shoulder

    A 400 x 400 x 230mm component-certified enclosure made to the customer’s drawing with a stepped top shoulder, and laser-cut entries in the top and base. Certified II 2 G D, Ex eb IIC Gb, Ex tb IIIC Db IP66.

  • Seven special 2mm 316L enclosures
    Industrial 316L, 2mm Sept 2026

    Seven special 2mm 316L enclosures

    Seven 395 x 405 x 281mm enclosures with quarter-turn locks, special studs inside and out, welded feet, lifting eyes and a customer-specific boss welded to the base.

  • Ex e enclosure with an angled face
    ATEX 316L, 1.5mm Aug 2026

    Ex e enclosure with an angled face

    A 302 x 800 x 206mm component-approved Ex e enclosure, close-coupled to an Ex d enclosure. The mating face is angled 1.9° off square so the two fit exactly. 15 x M20 and 1 x M25 entries in the top.

  • Dual operator consoles
    Industrial Stainless steel Aug 2026

    Dual operator consoles

    A set of dual control operator consoles for a long-standing customer, designed quickly from their specification.

  • 1750mm twin top-hinged enclosure
    Industrial 316L, 1.5mm Aug 2026

    1750mm twin top-hinged enclosure

    A 630 x 1750 x 230mm enclosure with two full-width top-hinged doors on four gas struts and a removable centre bar.

  • Front-and-rear access enclosure on a plinth
    Industrial 316L, 2mm Aug 2026

    Front-and-rear access enclosure on a plinth

    A 500 x 600 x 500mm iTB on a 100mm plinth, with a glazed front door, a plain rear door for pipework access, 19-inch adjustable rack supports and removable top and bottom gland plates.

  • Sloped-roof HMI enclosures, Zone 2
    ATEX Stainless steel Jul 2026

    Sloped-roof HMI enclosures, Zone 2

    Two sloped-roof iTB HMI enclosures certified for Zone 2, with the customer’s own protective covers fitted over the screens.

  • Offshore terminal box, 85 terminals
    ATEX 316L, 2mm, painted Jul 2026

    Offshore terminal box, 85 terminals

    A 500 x 400 x 160mm iSTB for an offshore installation with 72 terminals and 13 earth terminals, 16 entries closed with certified brass stopping plugs, and an engraved ID tag. Certified II 2 G Ex eb IIC T6 Gb and II 2 D Ex tb IIIC T85°C Db IP66, −50°C to +40°C.

  • Paired enclosures with label holders
    Industrial 316L Jul 2026

    Paired enclosures with label holders

    A matched pair: a larger enclosure with a hinged lid and a smaller one with a lift-off lid, both with top-hat label holders and entries for control operators.

  • Low-profile landscape iTB
    Industrial 316L, 2mm Jul 2026

    Low-profile landscape iTB

    A 230 x 600 x 200mm iTB in landscape format for cable tray installations with little vertical space.

  • Zone 22 junction box
    ATEX Stainless steel Jul 2026

    Zone 22 junction box

    A 300 x 200 x 200mm wall-mounted junction box certified for Zone 22 dust, to sit alongside a 1400 x 1000 x 400mm main cabinet.

  • 600mm cube enclosure
    Industrial 316L, 1.5mm Jul 2026

    600mm cube enclosure

    A 600 x 600 x 600mm enclosure with 400 x 400mm gland plate openings on four faces, a lift-off door for cable pulling and M8 nutserts to bolt it to a frame. No internal plate, as specified.

  • Control panel on welded feet, Zone 2/22
    ATEX 316L Jul 2026

    Control panel on welded feet, Zone 2/22

    A 600 x 400 x 200mm panel with 4 pushbuttons, 3 selector switches and 15 LED indicators, 4 x M32 side entries and welded feet. Certified II 2 G Ex db eb IIC T5 Gb and II 2 D Ex tb IIIC T100°C Db IP66, −50°C to +55°C, which also covers Zone 1/21.

  • Painted 304 cabinet, 1400mm
    Industrial 304, RAL 7032 Jun 2026

    Painted 304 cabinet, 1400mm

    A 1400 x 1000 x 300mm cabinet in 304 stainless steel, painted RAL 7032, built exactly to the customer’s request.

  • Sloped-roof iTB with isolator
    Industrial 316L, 1.5mm Jun 2026

    Sloped-roof iTB with isolator

    Two 548 x 380 x 200mm sloped-roof iTB enclosures with external labels, an IP6X isolator, and glands and stopping plugs fitted in the base.

  • HMI and printer enclosure with canopy
    Industrial Stainless steel Jan 2026

    HMI and printer enclosure with canopy

    An industrial enclosure for an HMI with a printer feed, finished with a custom-fit canopy.

Your project next

Send us the drawing.
We'll quote it today.