A long-standing European distributor of Ex equipment, based in Germany, needed a compact certified terminal box for hazardous-area installations. They had a clear specification and little tolerance for compromise.
The first order was for 22 units. A repeat order for 9 more followed the next year, a good sign the design was performing in the field.
The brief
- A 200 x 200 x 120mm iSTB enclosure
- 316L stainless steel, 1.5mm gauge, for corrosion resistance
- Powder coated in the customer's own RAL 5012 light blue
- ATEX component certification II 2 G D, Ex eb IIC Gb, Ex tb IIIC Db, IP66, for gas and dust areas
What we built
- An even RAL 5012 powder coat across lid and body
- A bolt-down lid (no hinges) held by captive socket-head screws, which keeps the Ex tb dust seal consistent
- M20 and M25 entries machined in the base, ready for the customer's glands
- An M6 internal/external earth stud for bonding continuity
- Four M6 x 25mm rear studs carrying a galvanised mounting plate for terminal rails
Certification is a controlled build
For an Ex eb terminal box, certification isn't a sticker. Gauge, welds and IP66 sealing all have to match the certified drawing every time. That repeatability is why the distributor came back.
What the marking means. Ex eb is increased safety: the enclosure and terminals are built so that no arc, spark or hot surface can occur in normal use, rather than containing an explosion. Ex tb means the enclosure keeps dust out tightly enough for combustible-dust areas, and IP66 confirms it is dust-tight and resists powerful water jets. Category 2 (Gb/Db) equipment is suitable for Zones 1 and 2 (gas) and Zones 21 and 22 (dust). See our Ex eb guide and zone classification guide.
Got a similar requirement? Send us your drawing or spec, or call +44 1233 801 890.