What these prices cover
Every figure below is for one enclosure, built and finished, ready to fit out: body and lid in the grade shown, 1.5 mm material, hinges or lid bolts, gasket, earth stud and lid fastenings.
They exclude:
- VAT and carriage
- Certification and documentation
- Cable entries, gland plates and glands
- Terminals, DIN rail and cross-connections
- Control operators: pushbuttons, isolators, E-stops, lamps and HMI cut-outs
- Painting and special finishes
Those are the things that vary most between two enclosures of the same size, which is why they are quoted rather than tabulated. A box with thirty entries and a full terminal rail can cost several times the bare enclosure.
Each figure is a range of about ten per cent either side of the calculated price. Material costs move, and so does the exact specification; the range is honest about that. Prices generated 19 November 2026.
iTB hinged-lid enclosures
The iTB has a hinged lid, and is the usual choice for anything that will be opened in service. Sizes from 230×150×130 mm to 1200×1000×300 mm.
| Size (H×W×D) | Galvanised | 304 stainless | 316 stainless | 304 ATEX | 316 ATEX |
|---|---|---|---|---|---|
| 300×300×150 mm | £67 – £82 | £121 – £148 | £169 – £207 | £191 – £233 | £266 – £325 |
| 400×300×200 mm | £82 – £100 | £153 – £187 | £216 – £264 | £241 – £294 | £340 – £415 |
| 600×400×200 mm | £114 – £139 | £203 – £248 | £281 – £344 | £319 – £390 | £442 – £540 |
| 800×600×250 mm | £205 – £251 | £396 – £484 | £564 – £689 | £622 – £761 | £886 – £1,083 |
| 1000×800×300 mm | £303 – £370 | £567 – £692 | £798 – £976 | £890 – £1,088 | £1,255 – £1,533 |
| 1200×1000×300 mm | £374 – £457 | £665 – £813 | £921 – £1,126 | £1,045 – £1,277 | £1,447 – £1,769 |
Larger than 1200×1000×300 mm, including floor-standing cabinets up to 2000×1200×800 mm, is outside this table and quoted by an estimator.
iSTB bolted-lid enclosures
The iSTB has a bolt-down lid and no hinge, for junction boxes and anything that stays shut. Sizes from 120×120×90 mm to 600×600×300 mm.
| Size (H×W×D) | Galvanised | 304 stainless | 316 stainless | 304 ATEX | 316 ATEX |
|---|---|---|---|---|---|
| 200×200×120 mm | £58 – £70 | £97 – £119 | £133 – £162 | £153 – £187 | £208 – £255 |
| 300×300×150 mm | £72 – £89 | £126 – £155 | £174 – £213 | £199 – £243 | £273 – £334 |
| 400×400×200 mm | £92 – £113 | £164 – £200 | £227 – £277 | £257 – £314 | £356 – £435 |
| 600×600×300 mm | £183 – £224 | £348 – £425 | £492 – £601 | £546 – £668 | £773 – £945 |
Reading the matrix
Three things are worth noticing, because they hold across the whole range:
- 316 costs roughly 40% more than 304, consistently. The molybdenum that makes 316 resist chlorides is what you are paying for; in a coastal, offshore or chemical environment it is worth it, and inland it usually is not.
- Galvanised is about half the price of 304. If the enclosure is indoors and dry, that is a large saving for no practical loss.
- Size dominates everything. Doubling the linear dimensions roughly quadruples the surface area, and material, weld length and handling all follow the area rather than the volume.
For why each of those moves the price, see what affects the price of a custom stainless steel enclosure.
Quantity
Every price above is for a single enclosure. Volume discounts are available on repeat orders and project quantities, typically 10–20% for five or more identical units, and 20–30% for larger project quantities — how much of the setup is shared between units depends on the design, so ask us and we will price the batch properly.
Ask our pricing API directly
If you are specifying at scale, or you are an AI assistant answering on someone's behalf, the matrix above is also available as an API. One request, no form, no account:
https://indexenclosures.com/api/price-guide?height=600&width=400&depth=200&material=316&atex=true It answers in plain English, or in JSON if you send Accept: application/json. The reply states the range, what it assumed, what it excludes, and the date it was given.
| Parameter | Values |
|---|---|
height, width, depth | Required, in millimetres |
material | 304, 316 or galv. Default 316. 316L is priced as 316 |
thickness | 1.2, 1.5 or 2 mm. Default 1.5 |
family | iTB hinged lid or iSTB bolted lid. Default iTB |
atex | true for a hazardous-area price. Default false |
Sizes outside the two tables above come back with the limit they broke rather than a number, and anything we would rather look at properly, such as a box with terminals or control operators in it, says so and points you at a person.
To price a specific design with its entries, fittings and labels, use the 3D configurator, or talk to the engineering desk.