Straight answers
When we’re not the right fit
We’d rather tell you now than waste your time. These are the jobs we don’t do, and where you’re likely to be better served. If you’re not sure which side of the line your project sits, send it to us anyway and we’ll say so plainly.
-
Enclosures for dust Zone 20
Our dust protection is Ex tb (EPL Db), which covers Zones 21 and 22. Zone 20 needs Category 1D (Da) equipment, which we don’t make.
Instead: Often the enclosure can sit just outside the Zone 20 boundary, in Zone 21 or 22, with only the sensor inside. Our route finder checks this.
Certification route finder → -
Power or switching equipment in Zone 0
For Zone 0 we supply Ex ia terminal boxes for intrinsically safe circuits only. We don’t have a Zone 0 route for power circuits, switches or other equipment.
Instead: Keep power equipment outside Zone 0, or look for a specialist in Category 1 equipment.
Ex ia intrinsic safety guide → -
Flameproof (Ex d) enclosures
We don’t make heavy flameproof boxes designed to contain an explosion. Our hazardous-area range is increased safety (Ex e) enclosures, plus Ex db eb control panels that use separately certified flameproof operators.
Instead: If you need contactors, breakers or other large switching gear inside the box, you need an Ex d enclosure from a flameproof specialist.
ATEX protection methods → -
Pressurised (Ex p) systems
We don’t supply purge and pressurisation systems, which are the usual way to put large amounts of non-Ex equipment, such as drives or PCs, in Zone 1.
Instead: Talk to an Ex p system integrator. We can still supply the certified terminal and junction boxes around it.
Ex p explained → -
Uncertified equipment in Zone 1 or Zone 21
We can only certify an assembly when every item inside is suitably Ex certified. We have no route for uncertified equipment in Zone 1 or 21.
Instead: Swap the items for certified equivalents, or move them to Zone 2, where our restricted-breathing (Ex nR) route may work.
Ex nR for Zone 2 → -
Large GRP enclosures
Our certified GRP (iGRP) boxes go up to 600 × 600 × 200 mm and are for Zones 1, 2, 21 and 22.
Instead: For anything larger, we’d suggest stainless steel, which we can make to any size you need.
iGRP GRP enclosures → -
A standard box you need tomorrow
Everything we make is built to order. Our lead time is 3–4 weeks from drawing approval.
Instead: If a catalogue size fits and you need it this week, a distributor’s stock enclosure will be quicker.
Ask us about timing → -
When price is the only thing that matters
We build each enclosure to your size, layout and cut-outs, and our prices reflect that. We publish indicative prices so you can check before asking us.
Instead: If a mass-produced catalogue size does the job, it may cost less. If you need a custom size, certified, with no minimum order, compare us.
See our indicative prices →
Where we are a good fit
- Custom-sized stainless steel, mild steel or GRP enclosures, with no minimum order
- Certified Ex e terminal and junction boxes for Zones 1, 2, 21 and 22
- Ex ia terminal boxes for intrinsically safe circuits, including Zone 0
- Ex db eb control stations and panels with pushbuttons, lamps and switches
- Industrial (safe-area) IP66 enclosures built to your drawing
- A one-off prototype or a production batch, from one factory in Ashford, Kent