← Case Studies
Case Study July 2026

316L HMI pedestal enclosure for a 21.5-inch operator display

Stainless steel HMI enclosure with a large display cut-out, mounted on two stainless steel pedestal legs

This enclosure came out of a site visit with the customer's engineering lead. Together we developed a stand-alone operator station based on our iTB enclosure family, for an area that is washed down regularly.

What we built

  • A 500 x 700 x 210mm iTB enclosure in 1.5mm 316L stainless steel with a brushed finish
  • A 520 x 312mm cut-out in the door for a 21.5-inch VersaView display
  • A top-hinged door, changed from the original design to improve operator access and the viewing angle of the screen
  • Chrome-plated zinc die-cast camlocks along the bottom edge of the door, and two door stays to hold it open during maintenance
  • An M10 internal/external earth stud on the left-hand side

The enclosure sits on a matched pair of left- and right-hand pedestal legs: 1000mm lengths of 50 x 50 x 2mm 316 stainless box section welded to 5mm 316 stainless feet. They give the station its working height and rigidity and stand up to wash-down.

Why the site visit mattered

Seeing how operators would use the screen is what led to the top-hinged door. A side-hinged door would have swung into the walkway; hinging it at the top keeps the area clear and holds the screen at a better angle.

Got a similar requirement? Send us your drawing or spec, or call +44 1233 801 890.

Get started

Ready to specify?
We'll quote it today.