← Case Studies
Case Study September 2026

Five compact ATEX control stations for a tight installation envelope

Compact stainless steel ATEX control stations with red and green lamps and pushbuttons on the lid

A controls integrator needed five ATEX-certified control stations for a hazardous-area installation. The space available was too tight for anything off the shelf, so the station had to be designed around the envelope rather than the other way round.

The brief

  • Five compact control stations, ATEX certified for a hazardous area
  • A red and a green signal lamp and a start/stop double pushbutton on each
  • Labels and layout to the customer's drawing

What we built

An iSTB enclosure in 1.2mm 316L stainless steel, 300 x 130 x 100mm, built under our control panel apparatus certificate. The lid carries four 30.5mm operator cut-outs, fitted with Ex-certified rail-mounted signal lamps in red and green and a red/green 1NO/1NC double pushbutton.

Each operator has a white/black/white traffolyte label, laid out exactly as on the customer's drawing. Inside, six WDU 2.5mm² beige terminals and one WPE earth terminal sit on TS35 DIN rail, ready for field wiring.

Why a certified control panel matters

Fitting Ex components into an Ex enclosure does not on its own make a certified assembly. Our control panel certificate covers the complete station, enclosure plus operators, so the integrator receives one certified item with its own marking and Declaration of Conformity instead of having to certify the assembly themselves. Our Ex db eb guide explains how this works.

Got a similar requirement? Send us your drawing or spec, or call +44 1233 801 890.

Get started

Ready to specify?
We'll quote it today.