← Case Studies
Case Study July 2026

Top-hinged 316L control enclosure for a vegetable processing line

Stainless steel enclosure with its top-hinged door held open on gas struts

A specialist in vegetable handling, trimming and conveyor systems needed a control enclosure for a pneumatic system on a cabbage line. Wash-down, organic debris and constant moisture meant a painted mild steel enclosure would not last.

What we built

  • A 390 x 600 x 230mm iTB enclosure in 1.5mm 316L stainless steel
  • A brushed external finish that sheds water and wipes down easily between shifts
  • A door hinged on the top face, as drawn by the customer, held open by two gas struts so an engineer can work hands-free
  • Two chrome-plated zinc die-cast camlocks in the centre of the front face
  • IP66 rating
  • A 2mm galvanised steel mounting plate on four M6 x 25mm rear studs
  • An M10 internal/external earth stud on the left-hand side

Why top-hinged

The door position drove the design. On a conveyor line, a side-opening door gets in the way of operators and product. Lifting the door upwards on gas struts keeps the working area clear and gives full access to the backplate, which makes commissioning and maintenance easier.

316L was chosen over 304 because its molybdenum content resists the chlorides found in cleaning chemicals and food residues. Our IP ratings guide explains what IP66 does and does not cover for wash-down.

Got a similar requirement? Send us your drawing or spec, or call +44 1233 801 890.

Get started

Ready to specify?
We'll quote it today.