DoC · EU/UKCA Declaration of Conformity (manufacturer)
EU/UKCA Declaration of Conformity: iTB and iSTB
iTB and iSTB terminal and junction boxes
| Certificate | EU/UKCA Declaration of Conformity: iTB and iSTB |
|---|---|
| Type | EU/UKCA Declaration of Conformity (manufacturer) |
| Equipment | iTB and iSTB terminal and junction boxes |
| Holder | indEx Enclosures Limited, Unit 5 Wyvern Way, Ashford, Kent, TN24 8DW |
| Issued by | indEx Enclosures Limited, signed by Mark Popple, Group Operations Director |
| Issue | 22 May 2026 |
| Zones | Gas Zones 0, 1 and 2 (Ex ia); gas Zones 1 and 2 (Ex e); dust Zones 21 and 22 (Ex tb) |
| Marking | II 1 G Ex ia IIC Tx Ga II 2 GD Ex e IIC Tx Gb, Ex tb IIIC Txxx°C Db |
| Protection | Intrinsic safety Ex ia · Increased safety Ex e · Dust protection by enclosure Ex tb |
Declares conformity with ATEX Directive 2014/34/EU and UK SI 2016/1107 under EU certificates CML 18ATEX3416U and CML 18ATEX3417X (CML B.V., Notified Body 2776) and UKCA certificates CML 21UKEX3746U and CML 21UKEX3745X (Eurofins E&E CML Limited, Approved Body 2503). Standards: EN 60079-0:2018, -7:2015, -11:2012, -31:2014.
Products covered
This page summarises the certificate for convenience. The PDF is the authoritative document; check its schedule and specific conditions of use before installation.